Videos Image
E-Mail Us    Or Call... (806) 381-8898
Handshake Image

   Our training videos are made here at DeArmond Tool. Every video shows in detail all the subject matter. We don't rush through these to get a release done. These are on DVD or CD disc and can be played on your computer. As well, in January 2012, we launched our new super support training site. ON LINE NOW! Our customers now enjoy three layers of support.... E-Mail, Phone, & Video!

Visa Master ImagePPal Image

  • VIDEOS ARE THE FASTEST WAY TO LEARN!
  • OUR VIDEOS SHOW EXACTLY "HOW TO"....
  • EACH VIDEO IS NARRATED IN BASIC, EASY TO UNDERSTAND DIRECTIONS.
Bar Image

 Dancer ImageEnjoy The 2 Free Basic Videos At The Bottom Of The Page!




Bar Image

How To Align The Z Column On Any Taig Mill....

Disc ImageThis is a short video showing exactly how to align the Z column with the X Axis on ANY Manual or CNC Taig Mill. Short and to the point so you can start making chips. The video is just over 3 minutes long.


Please note... If you purchased your machine from DeArmond Tool you already have FREE access to this video.

ORDER RIGHT HERE...RIGHT NOW!.... Only $16.50

Qty:

    Bar Image

How To Center A 4th Axis For Ring Cutting From A RingTube...

Disc ImageIn this video, we touch a little in CAD/CAM and then show exactly how to make a 4th axis...or someties called a "rotary" ready for ring cutting. The video is about 7 minutes long. This is one way set the rotary to zero for all 4 axis and cut a ring from a ring tube. There are other methods but this one works and is easy to understand. This is the method used in our shop every day. We use a Taig DSLS3000 4 axis mill here but this method will work on about any 4 axis milling machine.


Please note... If you purchased your machine from DeArmond Tool you already have FREE access to this video.

ORDER RIGHT HERE...RIGHT NOW!.... Only $21.50

Qty:

    Bar Image

How To Zero To Material Corner....

Disc ImageThis video will show you an effective, accurate, easy way to set a corner of the material as a zero point using the DRO in the Mach 3 controller software. No edgefinder is required, just a normal cutting tool. This is an easy process once you have seen the procedure and completed the task a couple of times. We use a Taig machine in this video but the procedure will work with any mill running MACH 3 software.

This is a MUST HAVE video for machine owners.

Please note... If you purchased your machine from DeArmond Tool you already have FREE access to this video.

ORDER RIGHT HERE...RIGHT NOW!.... Only $18.50

Qty:

    Bar Image

MAXNC MILL & SOFTWARE REVIEW....

Disc ImageAs you watch this video you will see the MAXNC mill and software in use. Each of the main controller screen buttons and information
areas is used & explained in detail. You see exactly what buttons to use on the keyboard to operate the mill. The mill itself is shown homing and being re-centered. External wiring connections and belt locations for spindle speeds is covered as well as important information about changing & aligning the belt & pulleys. The drive motor, encoder, cable connections & nomenclature, X,Y,& Z Screws, limit switches, circuit breaker, on/off switch, & accessory receptacles are shown so users will
know each of these parts first hand. Even collet and cutting tool mounting is shown. This is a MUST HAVE video for machine owners.
(Most useful for MAXNC owners using the old style DOS software!)

ORDER RIGHT HERE...RIGHT NOW!.... Only $27.95

Qty:
    Bar Image
   

MAXNC DEMO VIDEO....

Disc Image  If you are thinking of buying a MAXNC Milling Machine, this is the video for you. You can watch the machine as it drills and makes parts in 3 & 4 Axis routines. The machine is put through a lot of use in this video. This is not meant to be a training video, but to simply show the MAXNC machine at work. A great investment if you are planning to purchase a MAXNC milling machine and want to see one in full operation before you buy!

ORDER NOW... Only $39.95

Qty:
Bar Image
 

         Dancer ImageCOMING SOON.... These titles are due to be released soon!

 

  • TAIG CNC MACHINE SETUP.... (Perfect for those buying a Taig mill)
  • JEWELRY MAKING WITH THE TAIG DSLS 3000... (Perfect for jewelers with any machine)
  • WORKING WITH THE ROTARY TABLE.... ( Good for any machine owner)
  • MACH 3 IN A NUTSHELL.... (Great DVD for anyone using the MACH3 controller)
  • TWO SIDED CUTTING USING THE ROTARY TABLE...(Good for anyone wanting to do flip cuts using the rotary)
  • RING MAKING ON THE TAIG....(Perfect for those needing to cut rings from a tube)
  • THREE SIDED RING CUTTING....(For those wanting to work on EVERY side of a ring)
  • Rhino BASICS.... (For anyone starting out using Rhino)

Here is a sample of what is available on our new Super Support Video Site. ALL DEARMOND TOOL machine buyers have FREE access to our video site. Currently there are 20 videos up...and the count grows near daily. If you need help with the basic CNC steps then the free video below should be of some help. Enjoy!

THE BASIC STEPS OF CNC.... ENJOY!



A CNC Part From Cad To Finish!  A Long Movie But Covers A lot Of Information.