The Taig 2026-ER and 2027ER are also called the Taig 2000HD-ER and 2000LE-ER. These machines are identical. These are the open loop series of the TAIG CNC mills. The frames are the same, and they offer a little slower but the same smooth movement as the other Taig mills. If you are looking for an Open Loop CNC mill, then this is a great choice!
1 YEAR WARRANTY!
We Are A Licensed Taig Dealer. We Stock Every Machine & Accessory That Taig Makes.
These Open Loop mills can do a great amount of work. They are accurate and have great repeatability. Look at the specs below.
The Taig Open loop units offer the same great ER Spindle that is the industry standard. This allows 3/8 shank tooling to be used.
This system comes loaded with additional free goodies right now. A free ER-Collet set, Vise, 2 End Mills. MADE IN THE USA!
Both Mills Include The Industry Standard ER-16 Spindle. TOP OF THE LINE! This allows for a much broader range of tooling options. See our ER-16 Collets Page For Details.
The 2026-ER Model... Spindle speeds ranges from 1,100 to 11,000 RPM. The X axis table is 3.5" wide and 15.5" long. Rapid travel speeds to 30 IPM. Maximum Travel: X = 9.5", Y = 5.5", Z = 6.0" . Only... $2,284.99
The 2027-ER Model... has maximum travel: X = 12", Y = 5.5", Z = 6.0" Spindle speed ranges from 1,100 to 11,000 RPM. The X axis table is 3.5" wide and 18" long! Rapid travel speeds to 30 IPM. Only.... $2,475.99
The spindle accepts the industry standard ER-16 collets. This gives a much broader range of tool sizes that can be used. Look in our ER-16 collets page for details.
These are great, hard working machines!
Includes The Full 1/4 H.P. Continuous Duty Spindle Motor as Shown.
Controller Software Included
Includes All Required Cables
Maximum Travel Speed: 30 in/min.
200 Ounce Inch Stepper Motors
HARDENED ER16 Spindle in Mill Head
Includes Continuous Duty Full 1/4 H.P. Motor
Max cutter shank : 3/8 (with 3/8 ER16 collet)
Maximum Travel: X = 9.5", Y = 5.5", Z = 6.0"... (2026-ER Model)
Maximum Travel: X = 12", Y = 5.5", Z = 6.0"... (2027-ER Model)
Table dimensions 3 1/2 x 15 1/2 inches...(2026-ER Model)
Table dimensions 3 1/2 x 18-1/2 inches...(2027-ER Model)
Maximum Z distance to table : 8.0"
Z-Axis swivel 90 degrees
Mechanical Resolution: 0.0005 in.
Electrical Resolution: 0.00013 in.
Spindle Speeds: 1100-11000 RPM.
Rigid square tubular steel base and column construction.
X Axis - Hard Anodized cross slide table with 45 deg. dovetail.
Y Axis - Precisionly ground prismatic 90 deg. steel rail ways.
Z Axis - Steel box ways
Total Dimensions with motors 21" x 20" x 24".
Total Weight 85 lbs.
Please Call Or E-Mail Us If You Have Any Questions.